Home > Dryer > MUFENG Steam Dryer

MUFENG Steam Dryer

1. Low energy consumption;
2. High moisture uniformity;
3. Intelligent control, stable and safe operation;
4. Stainless steel track plates, no need to replace.


Share
MUFENG Steam Dryer
  1. Reference capacity is based on standard floating aquatic feed (e.g., Grass Carp,Tilapia), with pre-extrusion fat content <=5%, moisture reduction 10%, and die hole diameter 4-6mm.
  2. Bulk density of floating feed after extrusion: 300~380g/L.
  3. The company reserves the right to interpret data and configurations within legalscope. Final delivery shall prevail.
Performance Features
  1. Wide application, suitable for aquatic feed, pet food, and feed pellets;
  2. Designed to Euro-American environmental & hygiene standards;
  3. Direct-drive circulation fans with low noise, high efficiency, and stable operation;
  4. Fast installation, safe operation, low maintenance, and easy to repair.
Technical Parameters
Item Standard Configuration Optional Configuration
Conveyor Structure Slat Plate(Stainless Steel) Perforated Plate(Stainless Steel)
Contact Parts Material Stainless Steel
Gearbox Brand SEW Equivalent Brand
Steam Valve Brand Spirax Sarco(Core),Van  Tian(PRV) Imported Flow Meter Full set Spirax Sarco,Imported Flow Meter
Fan Brand Premium    Domestic Joint Venture Brand
Heat Exchanger Brand Domestic Stainless Steel Joint Venture Brand

 

Model Short Code Reference Capacity Steam Consumption (Floating  feed) Moisture Uniformity(%)
MFZB3000-4 M4 3.0~3.5 140~160 ±0.5
MFZB3000-5 M5 3.5~4.0 140~160 ±0.5
MFZB3000-6 M6 4.0~5.0 140~160 ±0.5
MFZB3000-8 M8 6.5~7.0 140~160 ±0.5
MFZB3000-10 M10 7.5~8.5 140~160 ±0.5
MFZB3000-11 M11 9.0~9.5 140~160 ±0.5
MFZB3000-12 M12 9.5~10.5 140~160 ±0.5
MFZB3000-14 M14 11.0~12.0 140~160 ±0.5
MFZB3000-16 M16 12.5~13.5 140~160 ±0.5
MFZB3000-18 M18 14.5~15.5 140~160 ±0.5
MFZB3000-20 M20 16.0~17.0 140~160 ±0.5
SDZB3000x3-6 M3-6 7-8 140~160 ±0.5
SDZB3000x3-8 M3-8 9.5-10.5 140~160 ±0.5
SDZB3000x3-12 M3-12 14-15.5 140~160 ±0.5
SDZB3000x3-14 M3-14 16.5-18 140~160 ±0.5
Raw Materials and Final Products
The horizontal dryer can choose steam or natural gas heat source. The natural gas heat source has lower energy consumption than the steam heat source and is easier to maintain. It can be used for drying various puffed aquatic feeds, puffed pet feeds, etc.
Turnkey successful projects
Always Create Client Value
FAQ
What is the drying cost?
The steam consumption of a steam dryer to dry one ton of feed is about 150-250KG. The quality varies according to the particle size. Generally, sinking materials consume more gas. Using natural gas to dry one ton of floating materials consumes about 10-12 cubic meters of gas, and sinking materials consume about 15-18 cubic meters.
How to control the moisture uniformity of the dryer drying puffed feed?
The key point affecting moisture uniformity is uniform distribution of the material, and the wind path design is stable and uniform in air volume and pressure; Mufeng intelligent dryer uses servo motor to control the distributor, the distribution is uniform, the wind path design is consistent, and the moisture uniformity is within ±0.5%;
What feed is difficult to dry?
It is difficult to dry sinking materials and particles with a diameter greater than 20mm and less than 0.8mm. Sinking materials and large particles need to extend the drying time to obtain good drying effects and lower energy consumption; small particles need to prevent particles from leaking on the mesh belt and being blown away by the wind. The mesh belt of Mufeng dryer adopts the form of roll-welded stainless steel mesh to adapt to the drying of small particles.
Request Quote
Always Create Client Value

    *

    *

    Production Line

    Production Capacity

    *Messages

    Related Products
    We are professional supplier of animal feed pellet production line, pet food production line and biomass pellet production line.
    Get A Free Quote

      *

      *

      Production Line

      Production Capacity

      *Messages

      x